Background Image

TRANSMISSION COMPANY OF NIGERIA (TCN)-

REQUEST FOR BIDS FOR RECONDUCTORING OF 132KV TRANSMISSION LINES

TRANSMISSION COMPANY OF NIGERIA (TCN)
PROJECT MANAGEMENT UNIT (PMU)
REQUEST FOR BIDS
EMPLOYER: TRANSMISSION COMPANY OF NIGERIA
PROJECT: NIGERIA ELECTRICITY TRANSMISSION PROJECT
CONTRACT TITLE: RECONDUCTORING OF 132KV TRANSMISSION LINES
COUNTRY: NIGERIA
CREDIT NO: 61850- NG
IFB NO: NTP- TR5G

1. The Federal Republic of Nigeria has received financing from the World Bank toward the cost of the Nigeria Electricity Transmission Project, and intends to apply part of the proceeds toward payments under the Contract for the Reconductoring of 132kV Transmission Lines.

2. The Transmission Company of Nigeria-Project Management Unit now invites sealed Bids from eligible Bidders for Reconductoring of 132kV Transmission Lines.

The scope of work is Reconductoring of 132kV Transmission Lines of two (2) 132kV Transmission Lines as shown below. The completion period of the contract is twenty four (24) months.

The transmission lines are as follows:
• Reconductoring of Kumbotso- Hadejia 132kV Single circuit Line of about 165km Route Length
• Reconductoring of Kumbotsho- Kankia 132kV Single circuit Line of about 100km Route Length

3. Bidding will be conducted through international competitive procurement using a Request for Bids (RFB) as specified in the World Bank’s “Procurement Regulations for IPF Borrowers January 2017, revised November 2017 and August 2018 (“Procurement Regulations”), and is open to all eligible Bidders as defined in the Procurement Regulations.

4. Interested eligible Bidders may obtain further information from Transmission Company of Nigeria Plc, Project Management Unit (TCN-PMU) – Engr. T. M. Bamalli. tcnpmu@tcnpmu.ng & bamalli.tukur@tcn.org.ng and inspect the bidding document during office hours 9:00am to 17:00pm Local time at the address given below.

5. The bidding document in English language may be purchased by interested eligible Bidders upon the submission of a written application via email to the above email address and upon payment of a non-refundable fee of Fifty thousand Naira (N50,000.00). The method of payment will be via Remita (https://www.remita.net/) by generating Remita Retrieval Reference (RRR) in favour of Transmission Company of Nigeria- Project Management Unit. Kindly follow these steps:
(i) Enter Remita platform
(ii) Select Pay FGN and State TSA
(iii) Select FGN
(iv) Under Who do you want to pay-Select Transmission Company of Nigeria -Project Management Unit
(v) Under Name of Services/Purpose-Select Transmission Company of Nigeria -Project Management Unit
(vi) Complete the form and Submit.

The bidding documents may also be accessed and downloaded via this link https://tcnpmu.ng/bidding-document-for-ntp-tr5g/
However, evidence of payment in accordance with item 5 above must be accompanied with your Bids.

6. Firms that cannot meet the following key qualifications requirements are not encouraged to participate in the Bidding Process:
(a) Average annual turnover requirement
Minimum average annual turnover of Six million, six hundred thousand US Dollars (US$6,600,000) calculated as total certified payments received for contracts in progress or completed, within the last Five (5) years
(b) Financial Resources:
The Bidder shall demonstrate that it has access to, or has available liquid assets, unencumbered real assets, lines of credit, and other financial means (independent of any contractual advance payment) sufficient to meet the construction cash flow requirements estimated as One million, one hundred thousand US Dollars (US$1,100,000)
(c) Specific Experience:
A minimum number of Two (2) similar contracts specified below that have been satisfactorily and substantially completed as a prime contractor, joint venture member, management contractor or subcontractor between 1st January, 2015 and Application submission deadline: Two (2Nos) Contracts, each of minimum value of Five million, three hundred thousand US Dollars (US$5,300,000)

You need to login to view the rest of the content. Please . Not a Member? Join Us

LAGOS STATE ELECTRICITY BOARD-

EXPRESSION OF INTEREST/PRE‐QUALIFICATION OF CONTRACTORS, SUPPLIERS, CONSULTANTS AND SERVICE PROVIDERS FOR THE VARIOUS ACTIVITIES OF LAGOS STATE ELECTRICITY BOARD.

LAGOS STATE ELECTRICITY BOARD
ADVERTISEMENT! ADVERTISEMENT!! ADVERTISEMENT!!!
INVITATION FOR PRE‐QUALIFICATION/EXPRESSION OF INTEREST
EXPRESSION OF INTEREST/PRE‐QUALIFICATION OF CONTRACTORS, SUPPLIERS, CONSULTANTS AND SERVICE PROVIDERS FOR THE VARIOUS ACTIVITIES OF LAGOS STATE ELECTRICITY BOARD.

PURPOSE:
The Lagos State Electricity Board (LSEB), being the implementing Agency for Energy Development, Independent Power Projects and Public Lighting Infrastructure in Lagos State, hereby invites Expression of Interest from prospective Contractors/Consultants/Suppliers with the objective of Pre‐qualifying these Contractors/Consultants/Suppliers to develop a data base of service providers with which the Lagos State Electricity Board will partner in subsequent bidding process and contract awards, for the following:

You need to login to view the rest of the content. Please . Not a Member? Join Us

UNIVERSITY OF NIGERIA, NSUKKA ENUGU STATE-

INVITATION TO PRE-QUALIFICATION (TECHNICAL BIDDING) PROPOSAL FOR TETFUND YEAR 2016, 2017,2018 AND 2019 (MERGED) ALLOCATION FOR INTERVENTION IN ENTREPRENEURSHIP CENTRES AT UNIVERSITY OF NIGERIA, NSUKKA

UNIVERSITY OF NIGERIA, NSUKKA ENUGU STATE
INVITATION TO PRE-QUALIFICATION (TECHNICAL BIDDING) PROPOSAL FOR TETFUND YEAR 2016, 2017,2018 AND 2019 (MERGED) ALLOCATION FOR INTERVENTION IN ENTREPRENEURSHIP CENTRES AT UNIVERSITY OF NIGERIA, NSUKKA

INTRODUCTION
University of Nigeria, Nsukka, Enugu State hereby invites interested, competent and reliable contractors to participate for prequalification in respect of the under-listed projects. The funds for the projects shall be drawn from TETfund Year 2016, 2017, 2018 and 2019 (merged) allocations for Entrepreneurship Centres.

SCOPE OF WORKS/SUPPLY

LOT DESCRIPTION TETFUND CODE
Z1 Supply, Installation, Testing and Commissioning of 1Nr 135 KVA Soundproof Generator, TETF/UNI/NSUKKA/ENTREP/16-19/01
Z2 Supply, Installation, Testing and Commissioning of ICT Equipment including: 30Nr Laptop, 4GB RAM, 500GB HDD, Intel Core 1.8 2.0 GHz, 15.6”, Webcam, Bluetooth, WLAN Windows 10 Pro, DVDRW, Black Color, 1 year Warranty, 10Nr HI’ LaserJet Pro M102 Printer, 5Nr HI’ Scanjet Professional 1000 Mobile Printer, and 2 Nr Photocopier AR6020, VAT inclusive. TETF/UNI/NSUKKA/ENTREP/16-19/02
Z3 Supply, Installation, Testing and Commissioning of Food Processing Equipment and Accessories comprising: 2Nr Gas Cooker (4 Gas Burners lamp, Gas oven with Grey Finish, Classic Home look, SS Textures Finish, Double Glass Insulated Door, Oven lamp), 2Nr Gas Cylinder 25KG, 2Nr Juice Extractor JE730, 3Nr Microwave, 3Nr 1 Litre Blender, 1Nr Popcorn Machine, 2Nr Longer Machinery Plain stain Slicer, 2Nr Chin Chin Cutter etc, VAT Inclusive. TETF/UNI/NSUKKA/ENTREP/16-19/03

You need to login to view the rest of the content. Please . Not a Member? Join Us

DEUTSCHE GESELLSCHAFT FUR INTERNATIONALE ZUSAMMENARBEIT (GIZ) GMBH-

EXPRESSION OF INTEREST

EXPRESSION OF INTEREST

The Deutsche Gesellschaft fur Internationale Zusammenarbeit (GIZ) GmbH; “Strengthening Capacities for Peace building and Conflict Resolution in Nigeria’s Middle Belt (PEACECORE) Programme”, financed by Federal Ministry of Economic Cooperation and Development of Germany, would like to procure “An 8OKVA Sound Proof Diesel Generator, and 4,000 litres Capacity diesel Tank, Delivery, Installation and Commissioning to Plateau State, Nigeria” with the following but not limited specification:

• 😯 KVA SOUNDPROOF DIESEL ENGINE GENERATOR incl.
Automatic switchgear wiring incl. earthing, armored cables, accessories, and civil works. Factory inspection certificate to be provided for the delivered generator.

• 4,000 LITRES FULLY CALIBRATED STEEL DIESEL TANK with the following minimum specification: Above ground vertical carbon steel diesel tank, capacity of 4000Ltrs (fully calibrated), incl. litre counter, electronic pump, anti-roll support, rust prevention layer and automatic stop gun, self-supporting base frame to support the tank bottom and up to 100% capacity, drain plug for maintenance and cleaning, ventilation pipe, Preparation of grounding connection point, accessories, and civil works. Connection to generator and country specific certification of installation. Factory inspection certificate to be provided for the delivered tank.

You need to login to view the rest of the content. Please . Not a Member? Join Us

ECONOMIC COMMUNITY OF WEST AFRICAN STATES(ECOWAS)-

REQUEST FOR BIDS FOR DESIGN, SUPPLY AND INSTALLATION FOR THE ELECTRIFICATION OF VILLAGES IN THE GAMBIA, GUINEA-BISSAU AND MALI

DESIGN, SUPPLY AND INSTALLATION FOR THE ELECTRIFICATION OF VILLAGES IN THE GAMBIA, GUINEA-BISSAU AND MALI
DATE : 02 FEB 2021 – 22 FEB 2021
VENUE : COMMISSION DE LA CEDEAO,
TOWN : ABUJA
COUNTRY : NIGERIA
SPECIFIC PROCUREMENT NOTICE
REQUEST FOR BIDS
DESIGN, SUPPLY AND INSTALLATION FOR THE ELECTRIFICATION OF VILLAGES IN THE GAMBIA, GUINEA-BISSAU AND MALI
RFB NO: NG-ECOWAS-DEM-197717-CW-RFB
EMPLOYER: PROJECT IMPLEMENTATION UNIT (PIU) OF THE GAMBIA, PIU IN GUINEA-BISSAU, PIU IN MALI AND REGIONAL COORDINATION UNIT (RCU) UNDER ECOWAS COMMISSION
PROJECT: ECOWAS-REAP PHASE 1
CONTRACT TITLE: DESIGN, SUPPLY AND INSTALLATION FOR THE ELECTRIFICATION OF VILLAGES IN THE GAMBIA, GUINEA- BISSAU, AND MALI
COUNTRIES: THE GAMBIA, GUINEA- BISSAU, AND MALI
CREDIT NO. / GRANT NO.: IDA D4080 – 6352GW/D406GW – 6353ML/D409ML
ISSUED ON: DECEMBER 10, 2020

1. The Republics of The Gambia, Guinea-Bissau, and Mali (The ”Client”) have received respectively a credit and/or a grant from the International Development Association (The ”Bank”) toward the implementation of the ECOWAS Regional Electricity Access project (ECOWAS-REAP), and intends to apply part of the proceeds toward payments under the Contracts for the Design, Supply and Installation for the Electrification of Villages in The Gambia, Guinea- Bissau, and Mali. For these contracts, the Borrower shall process the payments using the Direct Payment disbursement method, as defined in the World Bank’s Disbursement Guidelines for Investment Project Financing, except for those payments, which the contract provides to be made through letter of credit.

2. The Employer now invites sealed or pass worded Bids from eligible Bidders for the Design, Supply and Installation for the Electrification of Villages in The Gambia, Guinea- Bissau, and Mali. The Design, Supply and Installation services covered by this Specific Procurement Notice consist of three (3) separate lots distributed as follows (Quantities indicated hereafter are approximate):

The scope of services covered by this RFB is composed of three (3) distinct lots as follows:

• LOT 1: Design, Supply and Installation for the Electrification of Villages in The Gambia
• the design (update of the studies of the MV and LV networks) and approximately the following supply and installation based on the studies;
• the supply and installation of 496 km lines of three-phase medium voltage (MV) 33/30 kV,
• the supply and installation of 316 three phase distribution substations of 33/30 kV / 415 V,
• the supply and installation of 1200 km lines of low voltage (LV) 415 V,
• the supply and installation of terminal connection equipment, in particular connection points, smart meters for big customers, prepayment meters, as well as pre-wired metering panels for customers of more than 52,000 homes at low-voltage.

The time limit for execution of the work is twenty-four (24) months from the date of entry to force.

• LOT 2: Design, Supply and Installation for the Electrification of Villages in Guinea-Bissau. This lot has three phase distribution and single phase wire returned called “MALT” system
• the design (update of the studies of the MV and LV networks) networks for three phase distribution and MALT distribution) and approximately the following supply and installation based on the studies;
• the supply and installation of 1716 km lines of three phase medium voltage (MV) 30 kV, some with distributed ground and some without,
• the supply and installation of 74 km lines of single phase with one distributed ground medium voltage (MV) 17.32 kV,
• the supply and installation of 149 three phase distribution substations of 30 kV / 400 V,
• the supply and installation of 77 single phase MALT distribution substations of 17.32 kV / 230 V,
• the supply and installation of 931 km lines of low voltage (LV) 400/230 V of single phase with ground or three-phase with ground,
• the supply and installation of terminal connection equipment, in particular connection points, smart meters for big customers, prepayment meters, as well as pre-wired metering panels for customers of more than 35,000 homes at low-voltage.

The time limit for execution of the work is is twenty-four (24) months from the date of entry to force.

You need to login to view the rest of the content. Please . Not a Member? Join Us

TRANSMISSION COMPANY NIGERIA (TCN)-

REQUEST FOR BIDS FOR DIGITIZATION OF OLD TRANSMISSION SUBSTATION

TRANSMISSION COMPANY NIGERIA (TCN)
PROJECT MANAGEMENT UNIT (PMU)
REQUEST FOR BIDS
EMPLOYER: TRANSMISSION COMPANY OF NIGERIA
PROJECT: NIGERIA ELECTRICITY TRANSMISSION PROJECT
CONTRACT TITLE: DIGITIZATION OF OLD TRANSMISSION SUBSTATION
COUNTRY: NIGERIA
CREDIT NO. 61850-NG
RFB NO: NTP-TR12
ISSUED ON: 2ND FEBRUARY, 2021

1. The Federal Republic of Nigeria has received financing from the World Bank toward the cost of the Nigeria Electricity Transmission Project and intends to apply part of the proceeds toward payments under the Contract for the Digitization of Old Transmission Substation.

2. The Transmission Company of Nigeria-Project Management Unit now invites sealed Bids from eligible Bidders for Digitization of Old Transmission Substation.

The scope of work is Digitization of Old Transmission Substation as shown below. The completion period of the contract is twenty-four (24) months for each lot. The project consists of two (2) lots as follows:

– LOT 1: ABUJA, BAUCHI AND KADUNA REGIONS (14 SUBSTATIONS)
1. Seven (7 Nos) Substations that requires Partial Substation Automation SAS (installation of HMI- Work Stations & Gateway) are to be connected with existing RTU.
2. Four (4 Nos) Substations that require full Substation Automation System SAS (Work Station, Gateway and BCU) without Control & Protection relays.
3. Three (3 Nos) Substations that require Full Substation Automation System SAS (Work Station, Gateway and BCU) with Control and Protection relays.

– LOT 2: LOT 2: LAGOS, PORT-HARCOURT, BENIN AND ENUGU REGION (12 SUBSTATIONS)
1. Two (2 Nos) Substations that requires Partial Substation Automation SAS (installation of HMI- Work Stations & Gateway) are expected to be connected with existing RTU.
2. Seven (7 Nos) Substations that require full Substation Automation System SAS (Work Station, Gateway and BCU) without Control & Protection relays.
3. Three (3 Nos) Substations that require Full Substation Automation System SAS (Work Station, Gateway and BCU) with Control and Protection relays.

4. Bidding will be conducted through international competitive procurement using a Request for Bids (RFB) as specified in the World Bank’s “Procurement Regulations for IPF Borrowers January 2017, revised November 2017 and August 2018 (“Procurement Regulations”), and is open to all eligible Bidders as defined in the Procurement Regulations.

5. Interested eligible Bidders may obtain further information from Transmission Company of Nigeria Plc, Project Management Unit (TCN-PMU)-Engr. T. M. Bamalli. tcnpmu@tcnpmu.ng & bamalli.tukur@tcn.org.ng and inspect the bidding document during office hours 9:00am to 17:00pm Local time at the address given below.

6. The bidding document in English language may be purchased by interested eligible Bidders upon the submission of a written application via email to the above email address and upon payment of a non-refundable fee of Fifty thousand Naira (N50,000.00). The method of payment will be via Remita (https://www.remita.net/) by generating Remita Retrieval Reference (RRR) in favour of Transmission Company of Nigeria-Project Management Unit.
Kindly follow these steps: (i) Enter Remita platform (ii) Select Pay FGN and State TSA (iii) Select FGN (iv) Under Who do you want to pay-Select Transmission Company of Nigeria –Project Management Unit (v) Under Name of Services/Purpose-Select Transmission Company of Nigeria –Project Management Unit (vi) Complete the form and Submit.
The bidding documents may also be accessed and downloaded via this link https://tcnpmu.ng/______________________________
However, evidence of payment in accordance with item 5 above must be accompanied with your Bids.

6. Firms that cannot meet the following key qualifications requirements are not encouraged to participate in the Bidding Process:
• Average annual turnover requirement
Minimum average annual turnover of:
Lot 1 – Three million, five hundred and sixty thousand US Dollars (US$3,560,000)
Lot 2 – Three million, eight hundred and forty thousand US Dollars (US$3,840,000)
calculated as total certified payments received for contracts in progress or completed, within the last Five (5) years

(b) Financial Resources:
The Bidder shall demonstrate that it has access to, or has available liquid assets, unencumbered real assets, lines of credit, and other financial means (independent of any contractual advance payment) sufficient to meet the construction cash flow requirements estimated as
Lot 1 – Six hundred thousand US Dollars (US$600,000)
Lot 2 – Six hundred and forty US Dollars (US$640,000)

You need to login to view the rest of the content. Please . Not a Member? Join Us

TRANSMISSION COMPANY OF NIGERIA (TCN)-

REQUEST FOR EXPRESSIONS OF INTEREST FOR TECHNICAL ASSISTANCE FOR ENGINEERING SUPERVISION AND SITE MANAGEMENT OF RECONDUCTORING OF 132KV TRANSMISSION LINES PROJECTS (NTP-TR5G and NTP-TR5E).

TRANSMISSION COMPANY OF NIGERIA (TCN)
REQUEST FOR EXPRESSIONS OF INTEREST
(CONSULTING SERVICES – FIRMS SELECTION)
NIGERIA
NIGERIA ELECTRICITY TRANSMISSION PROJECT (NETAP)
CREDIT No: 61850-NG
PROJECT ID No.: PI46330
ASSIGNMENT TITLE: TECHNICAL ASSISTANCE FOR ENGINEERING SUPERVISION AND SITE MANAGEMENT OF RECONDUCTORING OF 132KV TRANSMISSION LINES PROJECTS (NTP-TR5G and NTP-TR5E).
REFERENCE No.: QCBS-NTP-TC4

The Federal Government of Nigeria has received financing from the World Bank toward the cost of the Nigeria Electricity Transmission Project (NETAP) and intends to apply part of the proceeds for consulting services.

The consulting services (“the Services”) include
• Project Management and Supervision.
• Technical Control of Engineering Designs.
• Receipt of the equipment in factory and supplies to site.
• Pre-commissioning Tests and Commissioning Upon Works Completion.
• Transfer of Know-How (Classroom and On the Job Training).

The approximate effort level for the assignment is one hundred and fifty-eight (158) man-months.
The Terms of Reference (TOR) for the assignment can be accessed at https://tcnpmu.ng/technical-assistance-for-engineering-supervision-and-site-management/

You need to login to view the rest of the content. Please . Not a Member? Join Us

MERCY CORPS-

INVIATION TO TENDER FOR SUPPLY AND INSTALLATIONS OF ELECTRIC TRANSFORMERS AND REHABILITATION OF SUBSTATIONS NETWORKING SYSTEMS IN BAMA LGA.

TITLE: SUPPLY AND INSTALLATIONS OF ELECTRIC TRANSFORMERS AND REHABILITATION OF SUBSTATIONS NETWORKING SYSTEMS IN BAMA LGA.
TENDER NUMBER: NIG/MDG/TEN29
CATEGORY: SERVICES
LOCATION: MAIDUGURI
PUBLISHED ON: 2020-12-15
POSTED BY: ADMIN
CLOSING DATE: 2021-01-08

Brief Summary:
MERCY CORPS, an International Non-Governmental Humanitarian Organization is pleased to invite companies/contractors to submit proposal for the upgrading of boreholes to solar systems Damboa, Dikwa, Gwoza & Ngala LGAs, Borno State – Nigeria. Mercy Corps chooses to hold competitive proposals for selection of companies/contractors which will implement our requirements. We believe that a competitive proposal is the only way to fairly select the best company for the job while ensuring good prices and preventing corruption.

You need to login to view the rest of the content. Please . Not a Member? Join Us

OYO STATE MINISTRY OF ENERGY & MINERAL RESOURCES-

INVITATION FOR BIDS FOR INSTALLATION OF MINI-GRID

OYO STATE GOVERNMENT
MINISTRY OF ENERGY & MINERAL RESOURCES
ARCHIVES BUILDING, SECRETARIAT, IBADAN OYO STATE
INVITATION FOR BIDS (IFB)
(IFB/EMR/19/197)
INSTALLATION OF MINI-GRID

1.The Oyo State Government, in her efforts to ensure provision of energy for the fulfilment of basic individual and community needs, intends to establish mini grid in some communities in the State.
2.The Ministry of Energy and Mineral Resources now invites sealed bids from interested, eligible and qualified contractors for design, construction, commissioning, operation and maintenance of isolated or interconnected mini grid below 1mw.

LIST OF PROJECTS

Lot No Location Qty (Unit) Delivery Period Bid Security
1 Ogbomoso South LG 1 3 Months 1% of Bid Price
2 Ona Ara Local Government 1 3 Months 1% of Bid Price
3 Iwajowa Local Government 1 3 Months 1% of Bid Price
4 Atiba Local Government 1 3 Months 1% of Bid Price

Interested Bidders can bid for one or more lots
3.Bidding will be conducted through National Competitive Bidding (NCB) procedures as specified in the Oyo State Public Procurement Guidelines for Works and are open to all bidders as defined in the guidelines.
4.Interested/eligible bidders may obtain further information from and inspect the bidding documents at the Ministry of Energy and Mineral Resources (Office of the Permanent Secretary) at Secretariat Ibadan.

5.QUALIFICATION REQUIREMENTS/ELIGIBILITY CRITERIA
Interested and competent Contractors wishing to carry out the projects as described above will be required to submit the following documents
(1)Evidence of Registration with the Corporate Affairs Commission (CAC) with the inclusion of Certificate of Incorporation and Articles of Association
(2)Company Tax Clearance Certificate for the past three years (2017-2019).
(3)Detailed Company profile including evidence that one of the key personnel of the company is a COREN registered Electrical Engineer and Organisation structure with names and telephone numbers of key personnel (Technical/Managerial)
(4)Evidence of financial capability (Reference letter from reputable bank)
(5)Copies of VAT Registration with TIN number and evidences of VAT remittances for the last 3years. (2017- 2019)
(6)Company’s Audited Accounts for the last three years (2017-2019)
(7)Evidence of registration with Oyo State Bureau of Public Procurement (BPP)

You need to login to view the rest of the content. Please . Not a Member? Join Us

Password reset link will be sent to your email