TENDER OPPORTUNITY FOR PROVISION OF RIG SITE CUTTINGS
TREATMENT SERVICES FOR OML 130

1.INTRODUCTION
TOTAL UPSTREAM NIGERIA LIMITED (TUPNI) operator of the OML 130 issues tender opportunity to interested and reputable Contractors with suitable equipment and relevant experience for consideration to tender for the Provision of Rig site Cuttings Treatment Services for its Deep Offshore OML130 operations.

2.BRIEF DESCRIPTION OF WORK SCOPE AND SPECIFICATIONS
The expected duration of this contract is three (3) years plus optional duration of one (1) year each.

The Rigsite Cuttings Treatment SERVICES shall include the provision of personnel, contractor equipment facilities and materials, consumables and operational support on a mobile drilling unit operating on OML 130 deep offshore development field with deep and long drain Deepwater wells. In addition, SERVICES shall include all required onshore support to ensure the realization of planned scope of operations. All Equipment provided shall include main and backup. In addition, the services shall include:

Provision of PERSONNEL, equipment, products and materials required for:
-The maintenance of the drilling fluids properties by controlling the solids content of the mud.
-The control of oil content on cuttings for overboard discharge, in order to fulfill the DPR (Department of Petroleum Resources) requirements.

CONTRACTOR shall perform the following:
Provide and install all solids control and cutting treatment equipment and associated plumbing
Test all equipment before each job.
Run and maintain all solids control and cutting treatment equipment with respect to COMPANY & local safety and environment policy
Daily cleaning of all equipment area.
Eliminate undesirable losses to aim at an absolute zero.
Optimize all discharge at sea.
Monitor and record the daily discharges.

CONTRACTOR obligations shall include (but not limited to:
Provide a valid organizational organigram for the onshore support and offshore execution of SERVICES with PERSONNEL having the required experience, qualification and valid training according to CONTRACTOR qualification and training policies and in accordance with COMPANY requirement.
Ensure that all required equipment is available in a timely manner, fully prepared, tested and commissioned as required and in first class condition in accordance with the requirements of the applicable operating manuals, operating instructions and of the latest regulations.
Ensure that all equipment and products shipped offshore are packaged and singed in accordance with COMPANY requirements.
Provision of back up equipment, spare parts and consumables necessary for all operations
Providing specialist assistance offshore during drilling/completion or well intervention operation
Providing an Engineering follow-up during the services – analyze the problems encountered in the delivery of SERVICES, propose and implement corrective measures to avoid problem of re-occurrence and propose, when practical, new procedures, tools or equipment that would improve the operational and HSE performance.
Providing the SERVICES in a safe and environmentally responsible manner in accordance with CONTRACTOR’s own and COMPANY’s requirements and applicable regulations.
Post-offshore operation support: redress and storage of equipment, post operations review meetings

3.MANDATORY REQUIREMENTS
To be eligible for this tender exercise, interested suppliers are required to be prequalified in the 3.04.13 Drilling Fluids / Mud Services Category of the Nipex Joint Qualification System (NJQS). All successfully pre-qualified suppliers in this category will receive an Invitation to Technical Tender (ITT).
To determine if you are pre-qualified and view the product/service category you are listed for; open http://vendors.nipex-ng.com and access NJQS with your log-in details. Click on Products/ Services Status tab to view your status and product codes.
If you are not listed in the product/service category but you have registered with the Department of Petroleum Resources (DPR) to do business in the Nigerian Oil & Gas Industry, contact the NipeX administration office at 8 Bayo Kuku Street, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
To initiate the NJOS pre-qualification process, access www.nipex-ng.com to download the application form, make necessary payments and contact NipeX office for further action.
To be eligible, all tenders must comply with the Nigerian content requirements in the NipeX system

4.NIGERIAN CONTENT
TUPNI is committed to the development of the Nigerian Oil and gas business in compliance with the Nigerian Content Act 2010 for Nigerian Content Development.

As from the commencement of this Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian oil and gas industry shall be consistent with the level set in the Schedule of the Act and any other targets as may be directed by the Nigerian Content Development and Monitoring Board (The Board)

Tenderer(s) shall comply with all the provisions of the Nigerian Content Act that relate to this advert and in particular comply with the minimum Nigerian Content percentage for the scopes which are covered in the Schedule of the Act. This also includes and any other requirement that may arise from time to time not explicitly stated in this advert, but which apply to the services in fulfillment of the Nigerian Content Act, in the submission of their Tender.

Failure to fully comply with the Nigerian Content Act or demonstrate commitment to Nigerian Content Development Policy of the Nigerian government shall result in the disqualification of the tenderer from the bidding process

TOTAL E&P NIGERIA LIMITED
OPERATOR OF THE NNPC/TOTAL JOINT VENTURE
TENDER OPPORTUNITY: PROVISION OF JV TECHNICAL ASSISTANCE SERVICES (TAS)
NIPEX TENDER NUMBER: 1000004897

1. INTRODUCTION
Total E&P Nigeria Limited, TEPNG (COMPANY) operator of the NNPC/TOTAL Joint Venture invites interested and pre-qualified companies for this tender opportunity for the Provision of JV Technical Assistance Services (TAS) in Nigeria. The commencement date is 9th November, 2020

TENDER OPPORTUNITY FOR PROVISION OF SPECIALTY COMPLETIONS FLUIDS FOR OML 130
NIPEX TENDER REF.: TUPNL.00000131

INTRODUCTION
TOTAL UPSTREAM NIGERIA LIMITED (TUPNI) operator of the OML 130 issues tender opportunity to interested and reputable Contractors with suitable equipment and relevant experience for consideration to tender for the Provision of Completions Fluids services for its Deep Offshore OML130 operations on its deep and long drain deep water wells

TOTAL UPSTREAM NIGERIA LIMITED
TENDER OPPORTUNITY FOR:
AKPO PRODUCTION FLOWLINES REPAIRS USING SUBSEA CLAMPS (DIVERLESS) FOR OML 130
NIPEX TENDER REFERENCE NO: 1000004776

1.0     INTRODUCTION
TOTAL Upstream Nigeria Limited (TUPNI) invites interested and reputable indigenous contractors with suitable equipment and relevant experience to apply to be considered for inclusion in the tenderers’ list for the subject tender.

2.0     BRIEF DESCRIPTION OF THE WORK SCOPE
The scope of service includes the provision of experienced and qualified personnel, equipment, materials and consumables for the engineering, fabrication and testing and delivery of subsea pipeline repair clamps (Diverless) and possible installation in Akpo Field (OML130) when required.
A total of four (4) clamps are planned to be designed, manufactured and delivered between Q4 2020 and Q2 2021 in readiness for installation if a leak should occur.

CONTRACT scope of work shall include but not limited to the following:
Engineering design of subsea pipeline repair clamps (Diverless).
Manufacture, including inspection services of clamps during manufacturing to ensure they comply with requirements and delivery of these clamps.
Installation aids which includes but not limited to coating removal tools, ROV packages, and OEM personnel in the future etc.
Mobilization and demobilization of equipment, tools and consumables
Contract Duration – Two (2) Years firm with option for one (1) year extension.
Estimated Award Date- Q4, 2020

TOTAL E&P NIGERIA LIMITED
TENDER OPPORTUNITY
PROVISION OF ONSHORE LAND RIG SERVICES FOR OML 58 DRILLING CAMPAIGN 2022-2023
NIPEX TENDER NUMBER: 1000004879

1.  INTRODUCTION
Total Exploration and Production Nigeria Limited (TEPNG) operator of the NNPC/TOTAL Joint venture invites interested reputable and pre-qualified contractors with relevant experience for this tender opportunity for “Provision of Onshore Land Rig Services for OML 58 Drilling Campaign 2022-2023”.

2.  SCOPE OF WORK
The land rig will be used to drill seven infill development wells, deviated and carryout work-over operations. It is scheduled to start operations with the rig in Q1 2022. The land rig shall have at least the following characteristics:
(a)      Rig maximum drilling depth = 5,500 m with 51/2 drill pipes
(b)     Mast gross nominal capacity ≥1,250,000 lbs
(c)      Drawworks ≥2200 HP.
(d)     Top Drive VarcoTDS-4 or equivalent.
(e)      3 x mud pumps 1600 HP each.
(f)      Mud tank capacity = 450 m3.
(g)     10,000 psi WP 3 Rams BOP and 5000 psi WP Annular preventer with 2 kill lines minimum 2″ ID and 1 choke line minimum 3″ ID.
(h)     10K choke manifold with 3 chokes (2 manually + 1 remotely operated), minimum ID 3″, 1 bypass line, 2 buffer chambers.
(i)      Rig skidding capability
(j)      Contractor must be a registered member of IADC or its local organization or chapter in Nigeria.

The scope of work for the Rig is as below –
(i)      3 Ibewa infill wells
(ii)     1OBD-1N Oil well
(iii)    1 Obagi Infill gas well
(iv)    Obagi Major gas cap (2 wells)

3.  MANDATORY REQUIREMENTS
(a)      To be eligible for this tender exercise, interested contractors are required to be prequalified in the 3.04.01 (Drilling Rigs and Production/ drilling Services) categories in NipeX joint Qualification system (NJQS) database. All successfully pre-qualified suppliers in this category will receive an Invitation to Tender (ITT).
(b)     To determine if you are pre-qualified and can view the product/service category you are listed for; Open vendors.nipex-ng.com and access NJQS with your log in details. Click on Products/Services Status tab to view your status and product codes.
(c)      If you are not listed in a product/service category and you are registered with DPR to do business, contact NipeX office at No 8-10, Bayo Kuku Street, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
(d)     To initiate the JQS pre-qualification process, access www.nipex-ng.com, to download the application form, make necessary payments and contact NipeX office for further action.

NIGERIAN AGIP OIL COMPANY LIMITED
OPERATOR OF THE NNPC/NAOC/OANDO LIMITED
ADVERT FOR TENDER OPPORTUNITY
UPGRADE OF THE BRASS TANK FARM DELUGE SYSTEM
NIPEX TENDER NO 1000004812

1. INTRODUCTION
Nigerian Agip Oil Company Limited (NAOC) intends to award one (1) Contract for Upgrade of the Brass Tank Farm Deluge System.

The work estimated to be completed within 16 months from the commencement date of contract.

NAOC, therefore, invites submissions for the purpose of technical evaluation from suitable and reputable companies having the capability and experience to undertake the under defined scope of work.

2. SCOPE OF WORK
The scope of work for this process covers but is not limited to the following activities:
(i) Supply and installation of twenty-one (21) new foam pre-mixers based on calculated foam requirements for each protected area existing pre-mixers to be replaced, 9Nos Foam Chambers for 23 project areas, 84 Nos Foam Pourers for 23 project areas, 1200 pcs Foam/Water Spray Nozzles for 23 project areas with piping materials and accessories (GRE Pipes, Deluges Valves, Manual Valves Elbows, Flanges, Tees, Reducer, Poets, Gaskets & Bolts/Nuts for 23 project areas)

(ii) Procure and Install two new Pre-mixer tanks for the New API and the Fuel Dump area. These areas have not been covered by existing Pre-mixer systems.

(iii) Dismantling and replacement of the existing water spray and foam systems in the tanks with Carbon Steel Pipes with internal coating to mitigate corrosion complete with new injector systems The battery limit for the replacement shall be limited to the Risers and compromised sections of the rings around the Tanks with accelerated work attention paid Tank 5 due to the low pressure currently experienced around the Tank

(iv) Extension of the F&G system to cover the Gun Barrel, API Skimmer, and dock area Pumps)

(v) Supply and installation of side glass level gauge at the new BFF water storage tank.