Background Image

ESSO EXPLORATION AND PRODUCTION NIGERIA LIMITED-INVITATION TO TENDER FOR PROVISION OF PLATFORM SUPPLY VESSEL (PSV) AND TUGS TO SUPPORT DEEP WATER OPERATIONS

ESSO EXPLORATION AND PRODUCTION NIGERIA LIMITED (EEPNL) AND ESSO EXPLORATION AND PRODUCTION NIGERIA (OFFSHORE EAST) LIMITED (EEPN(OE)L
(EXXONMOBIL AFFILIATES)
CONTRACTOR OF NNPC / ESSO PRODUCTION SHARING CONTRACT

TENDER OPPORTUNITY:
PROVISION OF PLATFORM SUPPLY VESSEL (PSV) AND TUGS TO SUPPORT DEEP WATER OPERATIONS
NIPEX NUMBER: ESSO.00000133

1. INTRODUCTION
Esso Exploration and Production Nigeria Limited (EEPNL), operator of NNPC OML 133 and Esso Exploration and Production Nigeria (Offshore East) Limited (EEPN(OE)L), operator of OML 138, herein referred to as “Esso” plans to engage the services of competent and qualified companies for the provision of offshore support vessels to support operations within its NNPC/Esso PSC acreages.

The anticipated contract term is for a primary period of five (5) years plus two (2) years optional extension.

2. SCOPE OF WORK
The scope of work includes provision of the equipment, personnel and necessary logistics to operate the underlisted vessels, which should have been built not earlier than 2015.
i. Platform Supply Vessels (PSV) with minimum cargo capacity of 3,200-ton deadweight, IACS Class, DP II, minimum 700sqm deck space, Surfer Ladder
ii. Anchor Handling Tug (AHTS) – IACS Class, DP II, Towing, anchor handling, min 100T BP, line handling, Kalm Forks, shark jaws, daughter craft, minimum deck space 300sqm, knuckle boom deck crane, oil dispersant & Spray booms, Line flushing + waste reception, Oil recovery, Pax cap – 20, surfer ladder, reefer points
iii. Line Handling Tugs (LHT) – IACS Class, Min 50T BP, pushing, towing, line handling, spray booms, fenders, surfer ladder

3. MANDATORY REQUIREMENTS
(a) To be eligible for this tender exercise, interested tenderers are required to be prequalified and have LIVE status in the 3.08.01 – Tugs/ROV Support/ Diving Support Services category in NipeX Joint Qualification Scheme (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Tender (ITT)
(b) To determine if you are prequalified and view the product/service category you are listed for: Open https://vms.nipex.org/login and access NJQS with your log in details, click on continue Joint Qualification scheme tool, click check “my supplier status” and then click supplier product group.
(c) If you are not listed in this product/service category and you are registered with NUPRC, please contact NipeX office at No.27 Oyinkan Abayomi Street, Ikoyi Lagos with your NUPRC certificate as evidence for verification and necessary update.
(d) To initiate the JQS pre-qualification process, access www.nipex-ng.com to download application form, make necessary payments and contact NipeX office for further action.
(e) To be eligible, all tenders must comply with the Nigeria Content requirements in the NipeX system

4. NIGERIAN CONTENT REQUIREMENTS
Company is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010. As from the commencement of this Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the Schedule to the Act and any other targets as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
NNPC/EEPNL PSC requires their Contractors to comply with the Act, its attached Schedule and any applicable regulation developed by the NCDMB.
Nigerian Content (NC) in the Nigerian oil and gas industry is defined as: “The quantum of composite value added to or created in the Nigerian economy by a systematic development of capacity and capabilities through the deliberate utilization of Nigerian human, material resources and services in the Nigerian oil and gas industry.”
“Nigerian company” is a company formed and registered in Nigeria in accordance with the provisions of Companies and Allied Matters Act with not less than 51% equity shares by Nigerians.
Tenderers shall consider Nigerian content as an important element of their overall project development and management philosophy for project execution.
As part of their submissions, Tenderers shall:
(a) Demonstrate that the entity is a Nigerian registered company with greater than 51% equity shareholding. Also, provide form CO2 and CO7, evidence of registration with NCDMB NOGIC JQS and NUPRC certificate.
(b) Demonstrate detailed description of the location of in-country committed facilities & infrastructure (address, layout drawing, lease document of technical & administrative office, storage, assembly area, repair and maintenance workshop) in Nigeria to support this contract.
(c) Provide a project-specific organogram showing Names and Nationalities of all key personnel not limited to (Vessel Master, Chief Mate, Navigational Officer of The Watch, Senior Dynamic Positioning Officer, Dynamic Positioning Officer, Deck Ratings, Chief Engineer, Second Engineer, Engineering Officer of The Watch, Electro-Technical Officer (ETO), Engineering Ratings, Chief Cook and Steward) that will execute the work scope for this service. CVs of all personnel listed in the project organogram should be submitted. For any position to be occupied by Expatriate personnel, tenderer shall commit to obtaining expatriate quota approval from NCDMB before project execution.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

ESSO EXPLORATION AND PRODUCTION NIGERIA LIMITED (EEPNL)-INVITATION TO TENDER FOR PROVISION OF MULTI-PURPOSE SUPPORT VESSEL (MPSV) TO SUPPORT DEEP WATER OPERATIONS

ESSO EXPLORATION AND PRODUCTION NIGERIA LIMITED (EEPNL) AND ESSO EXPLORATION AND PRODUCTION NIGERIA (OFFSHORE EAST) LIMITED (EEPN(OE)L
(EXXONMOBIL AFFILIATES)
CONTRACTOR OF NNPC LTD / ESSO PRODUCTION SHARING CONTRACT

TENDER OPPORTUNITY:
PROVISION OF MULTI-PURPOSE SUPPORT VESSEL (MPSV) TO SUPPORT DEEP WATER OPERATIONS
NIPEX NUMBER: ESSO.00000132

1. INTRODUCTION
Esso Exploration and Production Nigeria Limited (EEPNL), operator of NNPC OML 133 and Esso Exploration and Production Nigeria (Offshore East) Limited (EEPN(OE)L), operator of OML 138, herein referred to as “Esso” plans to engage the services of competent and qualified companies for the provision of offshore support vessels to support operations within its NNPC/Esso PSC acreages.

The anticipated contract term is for a primary period of five (5) years plus two (2) years optional extension.

2. SCOPE OF WORK
The scope of work includes provision of the equipment, personnel and necessary logistics to operate the underlisted vessels, which should have been built not earlier than 2010.
• Multi-Purpose Support Vessel (MPSV) with capacity to support buoy maintenance and hose handling operations. The MPV should have IACS Class, DP Class II, minimum 100Ton, knuckle boom crane with active heave compensation, subsea crane, auxiliary crane 25Tons, moonpool, ROV(x2), work class, minimum 100 Pax, Helideck, Surfer ladder

3. MANDATORY REQUIREMENTS
(a) To be eligible for this tender exercise, interested tenderers are required to be prequalified and have LIVE status in the 3.08.01 – Tugs/ROV Support/ Diving Support Services category in NipeX Joint Qualification Scheme (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Tender (ITT)
(b) To determine if you are prequalified and view the product/service category you are listed for: Open https://vms.nipex.org/login and access NJQS with your log in details, click on continue Joint Qualification scheme tool, click check “my supplier status” and then click supplier product group.
(c) If you are not listed in this product/service category and you are registered with NUPRC, please contact NipeX office at No.27 Oyinkan Abayomi Street, Ikoyi Lagos with your NUPRC certificate as evidence for verification and necessary update.
(d) To initiate the JQS pre-qualification process, access www.nipex-ng.com to download application form, make necessary payments and contact NipeX office for further action.
(e) To be eligible, all tenders must comply with the Nigeria Content requirements in the NipeX system

4. NIGERIAN CONTENT REQUIREMENTS
Company is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010. As from the commencement of this Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the Schedule to the Act and any other targets as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
NNPC/EEPNL PSC requires their Contractors to comply with the Act, its attached Schedule and any applicable regulation developed by the NCDMB.
Nigerian Content (NC) in the Nigerian oil and gas industry is defined as: “The quantum of composite value added to or created in the Nigerian economy by a systematic development of capacity and capabilities through the deliberate utilization of Nigerian human, material resources and services in the Nigerian oil and gas industry.”
“Nigerian company” is a company formed and registered in Nigeria in accordance with the provisions of Companies and Allied Matters Act with not less than 51% equity shares by Nigerians.
Tenderers shall consider Nigerian content as an important element of their overall project development and management philosophy for project execution.
As part of their technical tender submissions, prequalified Tenderers shall:
(a) Demonstrate that the entity is a Nigerian registered company with greater than 51% equity shareholding. Also, provide form CO2 and CO7, evidence of registration with NCDMB NOGIC JQS and NUPRC certificate.
(b) Demonstrate detailed description of the location of in-country committed facilities & infrastructure (address, layout drawing, lease document of technical & administrative office, storage, assembly area, repair and maintenance workshop) in Nigeria to support this contract.

(c) Provide a project-specific organogram showing Names and Nationalities of all key personnel not limited to (Vessel Master, Chief Mate, Navigational Officer of The Watch, Senior Dynamic Positioning Officer, Dynamic Positioning Officer, Deck Ratings, Chief Engineer, Second Engineer, Engineering Officer of The Watch, Electro-Technical Officer (ETO), Engineering Ratings, Chief Cook and Steward) that will execute the work scope for this service. CVs of all personnel listed in the project organogram should be submitted. For any position to be occupied by Expatriate personnel, tenderer shall commit to obtaining expatriate quota approval from NCDMB before project execution.
(d) Ensure that all Marine vessels to be deployed for work are assets categorized as stated below. Tenderer can either directly own marine vessels with the applicable Nigerian Content Marine Vessel Certificate (NCMVC) category or provide Memorandum of Agreement (MOA) with a vessel owner that has the applicable NCMVC category. To be eligible for partnerships with MOA, Tenderer must demonstrate ownership of any vessel type (not limited to vessel types below), with valid NCMVC.
i. Multi-Purpose Support Vessels (MPSV): Nigerian Content Marine Vessel Certificate (NCMVC) category A, B, C or D applies.
(e) Comply with the latest approved version of NCDMB HCD guidelines by committing (via a letter of undertaking) to providing Project-Specific training, man-hour, budget, skill development, and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution(s).

Tenderer’s failure to comply with the NOGICD Act or demonstrate commitment to Nigerian Content development will result in Tenderer’s disqualification

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

NEWCROSS EXPLORATION AND PRODUCTION LIMITED-TENDER OPPORTUNITY: THE PROVISION OF MARINE SERVICES FOR EKULAMA 1, 2, & AWOBA FLOWSTATIONS IN OML 24 SWAMP LOCATION.

NEWCROSS EXPLORATION AND PRODUCTION LIMITED
(OPERATOR OF THE NNPC/NEWCROSS E &P JOINT VENTURE)
TENDER OPPORTUNITY: THE PROVISION OF MARINE SERVICES FOR EKULAMA 1, 2, & AWOBA
FLOWSTATIONS IN OML 24 SWAMP LOCATION.
NIPEX TENDER NUMBER: 1000008041 / NewcrossEP.00000110

1.0 INTRODUCTION
Newcross Exploration and Production (Nigeria) Limited, Operator of NNPCL/ NewcrossEP Joint Venture in OML-24, located offshore in Rivers states, (referred to in this publication as “Insured”) hereby invites reputable and competent companies to apply for the Provision of Marine Services for Ekulama 1, 2, & Awoba Flowstations at an anticipated contract five (5) years primary and two (2) years optional extension. The contract is expected to commence in 2025. Please visit the Nigerian Petroleum Exchange Portal www.nipex-ng.com for further details.

2.0 SCOPE OF WORK
The scope of work shall include the following.•
Supply and operation of marine support vessels with competent marine crew.•
Contractor shall provide all the barge facilities required to stack all the equipment for all services during rig up and Operations.•
Contractor shall provide Houseboat with minimum 40man capacity with water storage, catering, housekeeping and laundry services•
Contractor shall provide diesel supply storage barge.•
Contractor shall provide Crane for loading equipment on the work barges.•
The contractor shall provide security houseboats with catering, housekeeping and laundry services.• Contractor shall provide means of transportation for personnel and equipment between location site which includes Landing craft, Tugboats, Speed Boats etc.

Other marine vessels include
Landing craft 4
Passport Boat 4
60 Man houseboat 1
40-man houseboat 1
Gun boats 4
Water barge 1
Diesel barge 1
Dumb barge 1
Ramp barge 2
Coral barge 2
NNRA Barge 2
Tugboats 1000hp 4

3.0 MANDATORY REQUIREMENTS
A. To be eligible for this tender exercise, interested bidders are required to be prequalified in any of the following Marine / Diving & Pipeline Equipment (1.13.05) and Transportation / Supply / Disposal Services (3.08.02) category in the Nipex Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this NJQS category by the advert close date will receive Invitation to Technical Tender (ITT) for this service.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

TRANTOR LOGISTICS-CALL FOR OFFERS: 2,000 MT FUEL BARGE (CALIBRATED) STORAGE BARGES AND 1,200 MT SELF-PROPELLED SEA GOING EVACUATION TANKERS/VESSELS.

CALL FOR OFFERS

Calibrated Fuel Barges and Self-Propelled Sea-Going Vessel/Tankers.

A leading Oil and Gas marine logistics company is seeking to lease/acquire the following marine equipment:

1) 2,000 MT FUEL BARGE (CALIBRATED) STORAGE BARGES.
2) 1,200 MT SELF-PROPELLED SEA GOING EVACUATION TANKERS/VESSELS.

Interested companies/owners should send the following details to info@trantorlogistics.com

• Company Name
• Company Address
• Contact Email & Phone
• Current Location of Barge / Tanker
• Relevant Equipment Type, Daily rate and Certifications

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

CHRISTOFFEL BLINDEN MISSION (CBM) INTERNATIONAL-

INVITATION TO BID FOR SUPPLY OF PICK-UP AUTOMOBILE VEHICLE

CBM SUPPLY OF VEHICLE
PRF NO.: NG-00125-2021-CBM
CHRISTOFFEL BLINDEN MISSION (CBM) INTERNATIONAL
INVITATION TO BID FOR SUPPLY OF PICK-UP AUTOMOBILE VEHICLE
PRF NO: NG-0125-2021-CBM

Christoffel Blinden Mission (CBM) is an international Christian development organization that works to improve the lives of persons with disabilities in the poorest parts of the world and to prevent avoidable disability. Over the years, CBM International has been supporting the Nigerian government through various implementing partners in interventions, such as eye health, mental health, obstetric fistula, and disability-inclusive development.

In line with achieving the major objective for this mission, CBM International is soliciting competitive, sealed bids from reputable companies to establish a contract for the supply and delivery of one (1) pick-up automobile vehicle below;

S/N ITEM DESCRIPTION QTY SPECIFICATION
1 4X4 Pick-up Automobile Vehicle 1 Specification is contained in the complete tender information. Please request via email from jobs.nigeria@cbm.org

Interested and suitably qualified dealers or suppliers may request complete Tender information (RFF) from the CBM International office located at;

Address: Christoffel Blinden Mission (CBM) International
No. 13 Okemesi Crescent, off Twon Brass Street, Garki 2,
Abuja-FCT, Nigeria.
+234 8167957924/ +234 7036243198
Or via email from: jobs.nigeria@cbm.org

SUBMISSION:
The hard copy bid documents should be submitted in a sealed envelope and labeled as “Supply and Delivery of Pick-up Automobile Vehicle”.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

STAR DEEP WATER PETROLEUM LIMITED

– INVITATION TO TENDER FOR PROVISION OF SUBSEA INTERVENTION VESSEL IN SUPPORT OF DEEPWATER OPERATIONS

STAR DEEP WATER PETROLEUM LIMITED
A CHEVRON COMPANY
OPERATOR OF THE AGBAMI UNIT (OML 127/128)
TENDER OPPORTUNITY PROVISION OF SUBSEA INTERVENTION VESSEL IN SUPPORT OF DEEPWATER OPERATIONS

NIPEX TENDER – STARDEEP 00000067

1. INTRODUCTION:
Star Deep Water Petroleum Limited (SOWPLJ invites interested and prequalified companies to this tender opportunity for the provision of a Subsea intervention Vessel required for Subsea Construction, Subsea IRM (inspection, Repair & Maintenance), conduct of underwater survey to identify challenges with the Subsea operations, provision of general support to Agbami FPSO operations, conduct of regulatory compliance work scopes inclusive of UWILD Inspections as well as supporting other operations such as the Seabed Survey for the Agbami Field. The proposed contract commencement September 1st, 2020 with a proposed term of four (4) years with a one (1) year option to extend.

2. SCOPE OF WORK:
The scope of work for the services Includes, but is not limited to, the Supply of Subsea Intervention Vessel with P2 system, certified to an appropriate classification society, with the following capabilities:
• Provision of subsea installation vessel with minimum DP2 capability and compliant with all NIMASA requirements for operation within Nigeria waters
• Installation of Subsea equipment with heave-compensated crane with minimum crane capacity of 100 metric tons at 2,000m of water depth
• Deck space capable of landing Anghami Subsea trees weighing over 60 tons. The minimum useable deck space required is 940m.
• Capacity to remain on station for at least 1 (one) month between resupply cycles.
• Capacity to work on equipment and operate 2 work class ROVS, 150hp each, in 2,000m of water depth.
• Vessel accommodation: Vessel POB must be a minimum of 100 beds.
• Distribution of diesel fuel to the FPSO and other vessels in bunkering operations.
• Distribution of fresh water to the FPSO and other vessels.
• Helicopter landing pad sufficient for a Sikorsky S92 helicopter
• Safety and life-saving equipment meeting all current SOLAS requirements
• Provision of engineering support services for conduct of subsea installations.
• Provision of Subsea Integrity Management Inspection and Services
• Provision of operational support to Agbami FPSO.
• Design and fabrication of Subsea tooling and equipment in support of IRM, Light construction, and intervention activities

Additionally, contractor will have the capability to support marine Inspection repair and maintenance activities on all subsea hull moorings, oil offloading lines and production equipment. Where animals are identified, Subsea Engineering support shall be able to assess the activities and procedures to safely and efficiently repair all subsea equipment. This excludes wellbore intervention. Engineering support shall also be capable of defining and executing construction support activities for new Christmas tree installations as well as flexible jumpers to tie back to manifolds. Contractor will be required to have proven Simultaneous Operations experience.

3. MANDATORY TENDER REQUIREMENTS:
A. To be eligible for this tender exercise, Interested bidders are required to be pre-qualified and live in the 3.05.09(Solving/ROV/Submersible Operations); 3.05.10 (Subsea Construction Services) und 3.08.01(Tugs/ROV Support/Diving Support Vessel) categories in Nipex Joint Qualification System (NJOS) database. All successfully pre-qualified and “live bidders in this category by the bid close date will receive an Invitation to Technical Tender (ITT).
B. To determine if you are pre-qualified and to view the product/service category you are listed for: Open http:/Renders.atpase.com and access BIOS with your log in details. Click on Products/Services Status tab to view your status and product codes.
C. If you are not listed in the product/service category you are registered with DPR to do business, please contact Nipex office at 8-10 Bayo Kuku Street, ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
D. To initiate the JQS prequalification process, access www.nipex-ng.com. click on services tab followed by NJOS registration
E. To be eligible, al tenders must comply with Nigerian Content requirements in the Nipex system. MOA with another category AAA vendor (nat bidding for this tender) on the NCDMB NOGIC marine vessel categorization owning the nominated vessel.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

CHEVRON

– PROVISION OF ANCHOR HANDLING TUGS & SUPPLY VESSELS IN SUPPORT OF CNL/NNPC JOINT OPERATIONS

INTRODUCTION: Chevron Nigeria Limited invites interested and prequalified companies for this tender opportunity for the Provision of Anchor Handling Tug & Supply (AHTS) Vessel in support of NNPC/CNL Joint Venture operations.

The proposed contract shall be awarded for a two (2) year primary term and an optional one (1) year extension 2.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us

CHEVRON NIGERIA LIMITED

– TENDER OPPORTUNITY: PROVISION OF ANCHOR HANDLING TUGS & SUPPLY VESSELS IN SUPPORT CNL/NNPC JOINT OPERATIONS

CHEVRON NIGERIA LIMITED
A CHEVRON COMPANY
OPERATOR OF THE NNPC/CNL JOINT VENTURE
TENDER OPPORTUNITY: PROVISION OF ANCHOR HANDLING TUGS & SUPPLY VESSELS IN SUPPORT CNL/NNPC JOINT OPERATIONS
NIPEX TENDER- CNL 00000197

1. INTRODUCTION:
Chevron Nigeria Limited invited interested and prequalified companies for this tender opportunity for the Provision of Anchor Handing Tug & Supply (AHTS) Vessel in support of NNPC/CNL Joint Venture operations. The proposed contract shall be awarded for a two (2) years primary term and an optional one (1) year extension.

You need to be logged in to view the rest of the content. Please . Not a Member? Join Us